In May 2019, the first of the 6 measurement campaigns planned at the Cuoiodepur WRRF was completed. The campaign, which was intended to measure oxygen transfer and the production of greenhouse gases produced by oxidation tanks, was carried out using the LESSDRONE prototype and lasted 10 days.
In July 2020, the first of the 2 measurement campaigns planned at the San Colombano WRRF was completed. The campaign, which was intended to measure oxygen transfer and the production
Action B4 continues: Development of the protocol for the reduction of energy consumption and greenhouse gas emissions. The biokinetic and hydrodynamic models have been implemented by UNIFI and UGENT respectively,
A scientific article on the experimentation carried out in the Lesswatt project has been published in the technical-scientific journal with free consultation Ingegneria dell’Ambiente (n.2 / 2020). The article can
LESSDRONE has been used for the first official off-gas testing of this project in the aeration tanks of Cuoiodepur Water Resource Recovery Facility (WRRF). The aim of the tests is to
In June 2020, the sixth of the 6 measurement campaigns planned at the Cuoiodepur WRRF was completed. The campaign, which was intended to measure oxygen transfer and the production of
Newsletter n.4 is now available on-line and can be downloaded from the section Download/Newsletter.
Department of Civil and Environmental Engineering (DICEA)
University of Florence
Via S.Marta, 3 – 50139 Firenze, Italy
Tel. +39 055 2758850 – Fax +39 055 2758800
info@lesswattproject.eu
Project n. LIFE16 ENV/IT/000486 – Duration: October 2017 – March 2021
Visitatori: 8779
